PGI Cobra Classic Nomex Hood

PGI Cobra Classic Nomex Hood

This hood is made from 100% Nomex material.

Fabric

• Outer shell is 100% Nomex/(Meta-Aramid) - approx. 7oz sq yd.
• 1 x 1 rib knit fabric - knit to allow approx. 130% stretch for maximum stretch and recovery.
• Calendared to minimize laundry shrinkage.

• All stitching conforms to federal Standard 751 Specifications (FED-STD-751)
• Major seams are flat seam assembled, stitch type 607
• Elastic in face opening is serged in with stitch type 504 and reinforced with bottom cover-stitch, stitch type 406
• Binding is applied with bottom cover-stitch, stitch type 406

• All seams are sewn with 100% Nomex thread size Tex 40

• Composed of two layers throughout.
• Seamed from top of face opening to bottom back then cover-stitched for extra strength.
• Face opening is circular in shape and serged with x-heavy duty 1/2" wide elastic around the perimeter. The elastic is then folded back 1/2" and cover stitched. The face opening stretches a full 16" (which is 25% more than conventional hoods) for easy donning and a snug fit around face of SCBA mask. Face opening maintains original shape after repeated launderings.
• The bottom edge of hood is bound with self-material bias binding.
• Shoulders are contoured on each side allowing the hood to lie flat on the chest and back for maximum coverage.